Attic Spray Foam Insulation Pooler, GA 31322 | Savannah Spray Foam Insulation

Spray Foam Insulation in Pooler, GA (31322) · Local Professionals

Savannah Spray Foam Insulation · Fast response in Pooler and the Savannah area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+36Verified Reviews

16Years in Business

4.9 ★Google Rating

24/7Available

Pooler's fast-growing subdivisions sit on slab foundations with vented attics that bake through Georgia's long cooling season, and that's where most of your summer energy bill goes. Savannah Spray Foam Insulation has been sealing and insulating homes across the Savannah area since 2010, and we know exactly what Pooler's construction looks like and what it needs.

When a room over the garage won't cool down, when your attic hits 140 degrees in July, or when you spot condensation and damp insulation in the crawl space, that's when Pooler homeowners call us. We're fully insured, we work in occupied homes, and we leave your property clean.

Spray Foam Insulation in Pooler (31322)

Pooler's newer subdivisions are built on slab-on-grade foundations with stick-framed walls and vented attics that carry the ductwork. That design works fine in a dry climate, but here in the Lowcountry, vented attics pull in hot, humid coastal air all summer long. The result is an attic that becomes a radiant oven, condensation that collects on the underside of the roof decking, and ductwork that has to work twice as hard to cool the house. Closed cell spray foam seals that attic tight, stops the moisture infiltration, and drops the temperature by 20 to 30 degrees on a hot day.

Older homes in and around Pooler often have raised crawl spaces with vented foundation walls, rim and band joists that are never insulated, and wall cavities that are either empty or filled with soggy fiberglass. We spray closed cell foam into those rim joists, seal the band boards, and inject foam into the walls to stop the air leakage and the moisture that drives inward through the foundation.

We've been doing this work since 2010. We know Pooler's building stock, the humidity profile in Chatham County, and what happens when you seal an attic or a crawl space the right way. We show up on time, we explain what we're doing, and we stand behind the work.

Our services in Pooler

Attic Spray Foam Insulation in Pooler · Savannah attics bake through long, humid cooling seasons…
Closed Cell Spray Foam Insulation in Pooler · Closed cell spray foam gives Savannah's humid crawl spaces and rim joists a…
Open Cell Spray Foam Insulation in Pooler · Open cell spray foam fills stud cavities in Savannah's new subdivision walls…
Wall & Injection Foam Insulation in Pooler · Wall injection foam fills hidden stud cavities in Savannah's century-old frame…
Crawl Space Spray Foam Insulation in Pooler · Savannah's raised crawl spaces under older homes pull in damp coastal air that…
Rim Joist & Band Joist Spray Foam in Pooler · Rim and band joists in Savannah's raised crawl-space homes are common weak…
Garage Spray Foam Insulation in Pooler · Garages in Pooler and Richmond Hill subdivisions bake through Savannah's long…
Metal Building & Barndominium Spray Foam in Pooler · Metal buildings and warehouses across Chatham County sweat and rust without a…
Commercial & New Construction Spray Foam in Pooler · New construction across Chatham…
Insulation Removal in Pooler · Old insulation in Savannah attics and crawl spaces traps decades of coastal…
Insulation Replacement & Re-Insulation in Pooler · Savannah homes with aging insulation lose the fight against humid coastal air…
Air Sealing in Pooler · Hurricane season winds and year-round humidity push air through gaps in…

How a Job Works in Pooler

We start with a free on-site assessment. You show us the space, tell us what's uncomfortable or what you've noticed (a hot room, condensation, an energy bill that's too high), and we walk the attic, crawl space, or wall cavities with you. We look at what's there now, check for moisture or contamination that has to be dealt with first, and measure the area we're going to cover. Then we write up a detailed estimate with the R-value and thickness we're specifying, the type of foam (open or closed cell), and a firm price for the work.

On the day of the job, our fully insured crew arrives with the spray rig and the equipment. We lay down drop cloths, seal off the work area with plastic sheeting, and run mechanical ventilation during the spray and cure. If there's old insulation that has to come out first, we remove it, haul it away, and clean the substrate before we spray. The foam cures in place, and we do a final walkthrough with you to make sure the coverage is complete and even.

If you're home during the work, we'll let you know the re-entry window. Most jobs need 24 to 48 hours for the foam to cure fully before you move back into the space. We clean up thoroughly and leave your property the way we found it.

Attic spray foam in Pooler typically runs from $1.50 per square foot for open cell to $1.20 per board foot for closed cell, depending on the thickness and R-value your attic needs. A 1,500-square-foot attic with 6 inches of closed cell foam usually falls in the $3,500 to $5,500 range. Crawl space foam starts around $2,500 for a small space and scales with the square footage and the depth of coverage. Rim and band joist sealing starts at $650. Wall injection foam for a closed cavity runs around $2 per square foot. If you have old, wet, or contaminated insulation that has to come out first, add $950 to $2,000 depending on the volume. The exact price depends on the area to cover, the R-value and thickness you need, whether it's open or closed cell, and what has to be removed or repaired before we spray. Call us at (912) 483-1976 for a free estimate. We'll measure, specify, and price the work honestly.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Pooler and nearby areas.

Why do attics in Pooler get so hot in the summer, and does spray foam actually help?

Pooler's vented attics are designed to let air flow from the soffit vents to the ridge vent, which works great in a dry climate. Here, those vents pull in hot, humid air off the Savannah River and the coastal plain. That air heats up under the dark roof decking and has nowhere to go. Closed cell spray foam seals the underside of the roof decking, stops the hot air from entering, and creates a conditioned space. Attics that were 140 degrees in July drop to 95 to 105 degrees after foam. Your AC doesn't have to fight that radiant load, and your ductwork cools the house faster and more evenly.

I see moisture and maybe mold spots in my attic or crawl space. Can you spray foam over that?

No, and we won't. If there's visible moisture, condensation, damp insulation, or any sign of mold or mildew, we stop and walk you through what has to happen first. Sometimes it's a roof leak that needs repair. Sometimes it's gutters that aren't draining properly, or a crawl space with standing water or a broken vapor barrier. We fix the moisture source first, dry everything out, and then spray. That's not a caveat, it's the standard. Call us at (912) 483-1976 if you're seeing moisture, and we'll help you figure out what's driving it.

What does attic spray foam cost for a typical Pooler home?

A 1,500-square-foot attic with 6 inches of closed cell foam usually runs $3,500 to $5,500 installed. Open cell foam is cheaper per board foot but you typically need more thickness to hit the same R-value, so the total cost is often similar. The price depends on the exact square footage, the R-value the code requires at your address, whether you need insulation removed first, and how tight the attic access is. Call us at (912) 483-1976 with your address and we'll give you a ballpark and schedule a free on-site estimate.

Who decides what R-value my attic needs, and does Pooler require a permit?

The energy code in force at your address sets the minimum R-value. In Pooler (31322), that's the responsibility of the City of Pooler Building Department. The code also governs the ignition barrier and thermal barrier that have to separate the foam from the living space. Your local building department can tell you what applies at your address. Some jobs need one, some don't. The building official at City of Pooler has the final say. When we write your estimate, we'll tell you what code applies and whether a permit is likely.

Can we stay in the house while you're spraying foam in the attic?

Yes. We seal off the work area with plastic sheeting and run mechanical ventilation during the spray and cure. You'll notice a smell, especially if it's open cell foam, but it's temporary. We ask you to stay out of the attic and the immediately adjacent spaces for 24 to 48 hours while the foam cures. After that, the space is fully usable. If you have an HOA or a master-planned community, let us know when you call. Some HOAs have rules about exterior work or access, and we'll coordinate with you.

Are you insured for this work?

Yes, we're fully insured. We carry general liability and workers' compensation coverage. Any reputable spray foam contractor carries both. When you get an estimate from anyone, ask to verify their insurance. We're happy to provide proof of coverage.

When is the best time to have attic foam sprayed in Pooler?

Pooler's cooling season runs from May through September, and that's when homeowners feel the heat and condensation problems most acutely. If your attic is uncomfortable or your energy bill is high, the sooner you seal it the sooner you save. Fall and winter are quieter seasons for us, so scheduling is usually easier and we can often fit you in faster. Spring is busy because everyone is thinking about summer. There's no bad time to call, but if you're planning the work, late winter or early spring gives you a comfortable attic before the heat hits.